Safe Contractor Approved
ADN Nº: IP0604

About Our Forklift Battery Cells

When considering the quality of our products?  

When asked about the quality of our products the number one question we are asked is “are our batteries cheap foreign imports?” P B Battery Solutions does not only supply and fit batteries to customer (end user) equipment, in fact, the bulk of our services are carried out to our regular forklift supply companies, these partners use our services on a regular basis, so it is paramount that we use only the highest quality products, every time.

Our Promise

If we cannot source your desired battery type/size from one of our trusted, tried and tested supplier we will refuse to quote.

About Us

As one of the UK’s best known, major Independent Forklift Battery refit companies we have the unique ability to source our cell from a number of high quality tried and tested suppliers. Amongst some of our preferred brands are –

INCI GS YUASA – A beautifully made battery cell. Part of the Japanese battery giant YUASA group, which has become a household name

ETERNITY TECHNOLOGIES – Produced by professionals with decades of battery cell producing expertise.  A tried and tested battery widely used by refit companies and Original Equipment Manufacturers from around the world. We would happily fit this product in even the most aggressive of applications.

Nationwide Fitting Service        

5 years warranty on all our 2v battery cells. Warranty T&C’s will always supplied at the point of quoting

 We promise to carry out the following services with our onsite fitting service carried out by skilled professionals, at your premises, at your convenience

  1. Remove redundant cells from battery box
  2. Clean battery Box
  3. Remove Corrosion
  4. When necessary and where possible
  5. Carefully install your new battery cells
  6. Supply and fit a new battery plug and harness
  7. Inspect and test our work
  8. Thoroughly clean the work area and leave in safe state
  9. Remove all hazardous waste and supply a waste disposal note if required

Monoblock Battery Identification

In order to speed up the quoting process it would help us considerably if you could supply some useful information to assist in identifying the  battery size required.






Forklift/Multi-cell Battery Identification

In order to speed up the quoting process it would help us considerably if you could supply some useful information to assist in identifying the Cell Type/Size required.

I.D Plate/Sticker Forklift/Multi-cell Battery Identification

All batteries come with some form of I.D plate or sticker, this plate will be located somewhere on the steel box in which the cells are fitted. The following information can be found on this plate. Cell Type - This reference usually consists of a mixture of both letters and numbers. Three examples of the same cell type:

  • 3PZS375
  • 7CD375sc
  • XWEF07

Battery Capacity - The battery capacity, generally a 3 digit number which is rated in "ah c5". Based on the cell type above this would read "375ah c5" Unfortunately this I.D plate can all to often can be missing, painted over or become illegible. If this is the case the measurements of a single cell/battery will do just as well, again based on the cell above this would be "195/8mm long x 65mm wide x 570mm high" The height can be the most difficult measurement to obtain, however a rough guide will do. In order to speed up the quoting process it would help us considerably if you could supply some useful information to assist in identifying the Cell Type/Size required. However don't worry if you don't for any reason feel confident to supply this information, just simply give us a call and we'll do the rest.

Which Battery?

Battery Measurements

If you have any questions about our new forklift batteries, please don't hesitate to call or contact us